Installed the Huges kit and a 180 tstat upgraded plugs wires cap and rotor. Cold airs in place and exhust is 3 inch free flow. Can I go to the dealer to get rid of the death flash or should i do a sct tunner or is super chips a good way to go. Also was thinking about new rollers and maybe a cam. Any thought or help would be great. Looking for more pulling power so can someone tell me what cam or rollers i should be looking at. Thanks for the help.

 

Contact HemiFever on this site, and go with one of his tunes. You can upgrade later to a custom tune to accommodate your new cam, etc.

 

http://www.bionicdodge.com/bionic/in...p?topic=9197.0

That is what you want in terms of a setup. I did the math, and it will cost ya 2500 for that cam, similar heads (hughesengines.com iron ram heads $799) and everything else needed (gaskets, roller rockers, lifters, thremostat, custom tune, headers). Don't need a new intake either.

You need to call KRC and have them grind that cam for you (200/206 .480/.480). I would also get rhoads lifters from Hughesengines. Need to get new lifters with a cam install.

-Dan

 

yeah def do a tuner bro you will likw the new found power having after having the flash