intake manifolds
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
I guess i am still confused then here is the manifold.
http://www.summitracing.com/parts/EDL-7577/?rtype=10
http://www.summitracing.com/parts/EDL-7577/?rtype=10
Administrator
Joined: Apr 2010
Posts: 87,397
Likes: 4,213
From: Clayton MI
Also on the magnum engines, the intake bolt holes are at a different angle. So, those holes would have to be different as well. The hole manufacturers have us by the short, and curlies.
Thread Starter
|
Registered User
Joined: Mar 2010
Posts: 24
Likes: 0
From: michigan
Eight holes. And their supplier for the holes has a monopoly. So, they are hideously expensive.
Also on the magnum engines, the intake bolt holes are at a different angle. So, those holes would have to be different as well. The hole manufacturers have us by the short, and curlies.
Also on the magnum engines, the intake bolt holes are at a different angle. So, those holes would have to be different as well. The hole manufacturers have us by the short, and curlies.
funny i knew 8 and wondered if i would get caught for only saying 4
