2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1998 RAM Infinity Bypass

Thread Tools
 
Search this Thread
 
Old Sep 29, 2011 | 12:15 PM
  #11  
nokaoii's Avatar
nokaoii
Registered User
Joined: Mar 2010
Posts: 10
Likes: 0
From: NW Ohio
Default

Check the service manual. Indeed there are some extra components on the "premium" Infinity systems that I will need to check out.

One being the Filter Choke/Speaker Relay. Cool. I have some things to test out now and maybe just flat out bypass.

Thanks everyone.
 
Reply
Old Nov 6, 2012 | 01:25 PM
  #12  
mizzbeks's Avatar
mizzbeks
Registered User
Joined: Sep 2012
Posts: 5
Likes: 0
From: Florida
Default

When I got my truck, the door speaker amps were already cut out and the wires were a mess! I got brand new speakers and a new head unit for the truck, but have no idea which wires to put together for the speakers to work....

Does anyone have the color code for the wires that go into the amp and what they do, so I know which ones go together?

I have a 2000 dodge ram crew cab.
 
Reply
Old Nov 6, 2012 | 01:34 PM
  #13  
UnregisteredUser's Avatar
UnregisteredUser
Grand Champion
Joined: Apr 2010
Posts: 5,011
Likes: 6
From: Meeker, CO
Default

Originally Posted by mizzbeks
Does anyone have the color code for the wires that go into the amp and what they do, so I know which ones go together?
The best bet is to check out the Wiring section of the factory service manual, which is available in this forum's FAQ/DIY section.
 
Reply
Old Dec 18, 2012 | 03:06 PM
  #14  
MDLEITHAL's Avatar
MDLEITHAL
Registered User
Joined: Nov 2012
Posts: 6
Likes: 0
From: ALABAMA
Default

Sorry for resurection an old thread but, I'm in the middle of an install as well. I ran all new wire for the speakers. With the oem unit installed the left side worked fine, found out i had a bad amp on rigt side 6x9. Anyway when I pulled out the head I found a black/blue wire disconnected, what is this used for? Mute? When I tried to put it in that pin it blew the pwr amp fuse. Also I didn't see a grounding strap or wire.

Any help would be much appreciated.
Thanks Matt
2000 Quad Cab 4x4
 
Reply
Old Dec 18, 2012 | 09:27 PM
  #15  
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

I don't know but this is where I'd start

http://www.google.com/search?q=2000+...hrome&ie=UTF-8
 
Reply
Old Dec 18, 2012 | 10:51 PM
  #16  
MDLEITHAL's Avatar
MDLEITHAL
Registered User
Joined: Nov 2012
Posts: 6
Likes: 0
From: ALABAMA
Default

OK GOT' ER DID!!
The black/blue is indeed a ground. Alll wired up and sounding pruddy darn good. Still need to hard mount the head unit and put door/dash panels back on. But MISSON ACCOMPLISHED!
 
Reply
Old Aug 14, 2013 | 01:20 AM
  #17  
bigdodge89's Avatar
bigdodge89
Registered User
Joined: Aug 2013
Posts: 1
Likes: 0
Default

Originally Posted by ryan0714
see if this helps ya

A Right Rear Spkr (-) Blue w/ White Stripe
B Left Rear Spkr (-) Brown w/ Yellow Stripe
C Right Front Spkr (+) Purple
D Left Front Spkr (+) Dark Green
E Right Rear Spkr (+) Blue w/ Orange Stripe
F Left Rear Spkr (+) Brown w/ Blue Stripe
G Power Antenna/Amp White (use for Infinity Radio)
H +12 Volt Battery Wire Pink or Pink w/ White Stripe
I +12 Volt Ignition Wire Red w/ White Strip
J Radio Dimmer Wire Do Not Use
K Headlight Dimmer Wire Do Not Use
L Right Front Spkr (-) Blue w/ Red Stripe
M Left Front Spkr (-) Brown w/ Red Stripe
N No Wire
Metal Braid Or Plastic Connector Attached To Back Of Radio Is The Ground Wire

But takin those little amps out might require you to turn the radio up more than normal, just a heads up. maybe come back later and install a new amp that runs to both doors. and as for ur tweeters, just run the 2 wires for them down to the + and - on the door speaker leads and soder them all together. will work like a charm.
what color are the tweeter wire color
 
Reply
Old Sep 23, 2014 | 02:26 PM
  #18  
Ramgirl1995's Avatar
Ramgirl1995
Registered User
Joined: Sep 2014
Posts: 1
Likes: 0
Default

Ok guys, I have a 1995 Ram. I ma trying to put new speakers and a new radio in but, the amplifier is not working. Where can I find a diagram that will show me the wires I need for the Amplifier?
 
Reply
Old Sep 23, 2014 | 02:29 PM
  #19  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

Go to this thread, and download the 95 service manual. Wiring diagrams are in section 8W.

Welcome to DF.
 
Reply
Old Sep 23, 2014 | 06:29 PM
  #20  
Spillage's Avatar
Spillage
Record Breaker
10 Year Member
Liked
Loved
Community Favorite
Joined: Sep 2012
Posts: 2,437
Likes: 73
From: S. Florida
Default

This was my speaker change out on a 98 w/Infinity.
https://dodgeforum.com/forum/2nd-gen...peakers-2.html
 
Reply



All times are GMT -4. The time now is 11:17 AM.