2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1998 Ram 2500 bumpers

Thread Tools
 
Search this Thread
 
Old Jun 17, 2010 | 08:21 AM
  #1  
powerlifterram's Avatar
powerlifterram
Thread Starter
|
Registered User
Joined: Jun 2010
Posts: 4
Likes: 0
From: Tulsa OK
Default 1998 Ram 2500 bumpers

I have a 98 Ram 2500 SLT with the chrome bumpers. Will the 99 ram 2500 Sport (fully painted) bumpers fit directly on my truck with no custom fab work to the brackets
 
Reply
Old Jun 17, 2010 | 09:50 AM
  #2  
2k10HemiRam's Avatar
2k10HemiRam
Captain
Joined: Jun 2007
Posts: 520
Likes: 1
From: Las Vegas, NV
Default

It'll bolt directly on, no custom fab work required. 98 was the last year all they did was paint the stock bumper, 99 they actually changed to the 1 piece bumper. So if you were switching to the 1 piece, you'd have to get all new mounting brackets and hardware but in your case, just buy the new bumper and it'll mount the same as the old.
 
Reply
Old Jun 17, 2010 | 09:28 PM
  #3  
powerlifterram's Avatar
powerlifterram
Thread Starter
|
Registered User
Joined: Jun 2010
Posts: 4
Likes: 0
From: Tulsa OK
Default

Thanks. so let me make sure im understanding you correctly. Since i have a 98 SLT, i can purchase the 99 Sport 1 piece bumper and bolt it straight on. Also, i noticed your truck is a 1500, mine is a 2500, all still applies
 
Reply
Old Jun 17, 2010 | 09:44 PM
  #4  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,398
Likes: 4,213
From: Clayton MI
Default

I am confused here too, I am seeing conflicting information.

First: It'll bolt directly on

But then...... 99 they actually changed to the 1 piece bumper. So if you were switching to the 1 piece, you'd have to get all new mounting brackets and hardware but in your case...

But, in his case, he has a 98 non-sport, and is looking at a 99 sport bumper....... So, he IS switching to the one piece........

@OP: Are you getting the bumper off a donor truck? If so, take all the brackets and mounting hardware as well, just in case.....
 
Reply
Old Jun 17, 2010 | 10:46 PM
  #5  
2k10HemiRam's Avatar
2k10HemiRam
Captain
Joined: Jun 2007
Posts: 520
Likes: 1
From: Las Vegas, NV
Default

oops, my bad, I didn't notice the 99 so yea, my info is a little off. You will need all new mounting hardware if you are going to put a 99 sport bumper on a 98. Sorry, I had 98 stuck in my head.

Here's a link to a LMC page which'll show you everything you need to make the swap

http://www.lmctruck.com/icatalog/de/full.aspx?Page=13
 
Reply




All times are GMT -4. The time now is 06:23 AM.