Truck updates
#1
Truck updates
Installed a few more things, Street Scene Cal Vu Mirrors, TruxSport Tonneau Cover, Tranny Temp gauge, ScanGauge2, New Distributor Cap, Rotor,Wires, and a new S&B Cold Air Intake. Truck is getting detailed tomorrow so I might snap a few more pics, then on Sunday traveling down to the Florida Keys for 5 days to try and enjoy it before the oil spill demolishes the place for a while.
Anyways, here are some pics
Tonneau Cover
Trans Temp Gauge
Scangauge2
S&B intake
This intake is great, it is a true Cold Air Intake, as it draws cold air in from the fender well like the stock setup, but with a completley sealed box around the filter. Noticed quite a bit of power down low, and the same power from 3k rpm on up as the 14x3 had, it is also a lot quieter than the 14x3 and provides a nice deep sound at WOT.
Anyways, here are some pics
Tonneau Cover
Trans Temp Gauge
Scangauge2
S&B intake
This intake is great, it is a true Cold Air Intake, as it draws cold air in from the fender well like the stock setup, but with a completley sealed box around the filter. Noticed quite a bit of power down low, and the same power from 3k rpm on up as the 14x3 had, it is also a lot quieter than the 14x3 and provides a nice deep sound at WOT.
Last edited by RamSport97; 06-25-2010 at 08:18 PM.
#5
Johnnyboy- As Mr. Freeze, stated, Geno's Garage, thats where I got the cup holder. And the gauge is an Autometer Z-Series gauge.
dodgeram07- Thanks buddy! And I believe this is the trans temp sender that I used.
http://www.summitracing.com/parts/ATM-2253/
dodgeram07- Thanks buddy! And I believe this is the trans temp sender that I used.
http://www.summitracing.com/parts/ATM-2253/
Last edited by RamSport97; 06-25-2010 at 07:36 PM.
#7
Trending Topics
#9