2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

E-Fan Kit Install

Thread Tools
 
Search this Thread
 
Old Jun 27, 2010 | 09:07 PM
  #21  
UnregisteredUser's Avatar
UnregisteredUser
Grand Champion
Joined: Apr 2010
Posts: 5,011
Likes: 6
From: Meeker, CO
Default

Originally Posted by ryan0714
would runnin fans on 100% of the time cause any problems, power wise you think? i dunno how much they actually pull.
If you just leave them on all the time, you'll actually expend more energy than was required to turn the mechanical fan so there's no point to installing them.
 
Reply
Old Jun 27, 2010 | 09:36 PM
  #22  
bigslick050's Avatar
bigslick050
Thread Starter
|
All Star
Joined: Jun 2009
Posts: 970
Likes: 0
From: Dacula GA
Default

Originally Posted by Pacmanloads
Low Drag Cyclone Blades w/ a 6000 Total CFM Rating

Low Amp Draw of 9 Amps Per Fan at Full Speed

Sealed Weatherproof Motors with Twin Ball Bearings

Lifetime Warranty


http://www.ffdynamics.com/ramB.html
Yep those are the ones I got, just purchased off ebay instead of their website. The main reason I got these specificly because of low amp draw and superior fan quality versus all the other ones I looked at on ebay. None of the other fans are twin ball bearing looked like cheap chinese made garbage...not putting anything in but the best I can find for Betty
 
Reply
Old Jun 27, 2010 | 09:38 PM
  #23  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,394
Likes: 4,213
From: Clayton MI
Default

Originally Posted by bigslick050
Yep those are the ones I got, just purchased off ebay instead of their website. The main reason I got these specificly because of low amp draw and superior fan quality versus all the other ones I looked at on ebay. None of the other fans are twin ball bearing looked like cheap chinese made garbage...not putting anything in but the best I can find for Betty
How did they mount up? and what is your opinion of the overall quality of the kit? Have you been running it long??
 
Reply
Old Jun 28, 2010 | 12:12 AM
  #24  
bigslick050's Avatar
bigslick050
Thread Starter
|
All Star
Joined: Jun 2009
Posts: 970
Likes: 0
From: Dacula GA
Default

It comes with the mounting kit that goes through the radiator and attaches to the fans. These in particular looked to be higher quality than anything else I have looked at over the past 2 weeks, but won't be certain until I receive them on tuesday for the install. Will keep yall updated as they get installed
 
Reply
Old Jun 28, 2010 | 12:33 AM
  #25  
02 4.7 Durango's Avatar
02 4.7 Durango
Rookie
Joined: Oct 2008
Posts: 57
Likes: 0
From: Ft Campbell ky/ Clarksville TN
Default efan review

so how did it go?


Originally Posted by bigslick050
It comes with the mounting kit that goes through the radiator and attaches to the fans. These in particular looked to be higher quality than anything else I have looked at over the past 2 weeks, but won't be certain until I receive them on tuesday for the install. Will keep yall updated as they get installed
 
Reply
Old Jun 28, 2010 | 01:25 AM
  #26  
bigslick050's Avatar
bigslick050
Thread Starter
|
All Star
Joined: Jun 2009
Posts: 970
Likes: 0
From: Dacula GA
Default

LMAO Will receive the kit on TUESDAY...DIY update coming soon with pics....
 
Reply
Old Jun 28, 2010 | 06:12 AM
  #27  
Pacmanloads's Avatar
Pacmanloads
Captain
Joined: Oct 2009
Posts: 607
Likes: 0
From: Moncton , New Brunswick
Default

Is it tuesday yet? Pics? Diy?
 
Reply
Old Jun 28, 2010 | 06:17 AM
  #28  
Pacmanloads's Avatar
Pacmanloads
Captain
Joined: Oct 2009
Posts: 607
Likes: 0
From: Moncton , New Brunswick
Default

I think I may get this kit as well and just fabricate a couple of simple brackets to mount them instead of going through the fins. I just asked the seller a question about a manual over ride switch to shut them off while crossing water and blast them when mudding and crawling . I will post his response and will probably order them tomorrow. 6000cfm should keep the old girl chilly .
Well he has responded to my question and here is the exact response .......
"the system comes with an lighted led in cab rocker switch that allows you to turn the system off for exactly that water crossings and such,as far as turning them on wide open there is no need,if your truck hits the turn on temps they come on and cool you down within 1 minute,they are fully automatic be it street driving or offroading,set it and forget it."

BIGSLICK please let me know what the quality looks like when you receive them as will be ordering them as well. Thanks
http://www.youtube.com/watch?v=Bd6ExR-zPXo
 
Reply
Old Jun 28, 2010 | 08:36 AM
  #29  
Sniperinhisname's Avatar
Sniperinhisname
Professional
Joined: Sep 2009
Posts: 233
Likes: 0
From: Asheville, NC
Default

DAYMN SON, he grabbed second and was GONE lol
 
Reply
Old Jun 29, 2010 | 07:03 AM
  #30  
Pacmanloads's Avatar
Pacmanloads
Captain
Joined: Oct 2009
Posts: 607
Likes: 0
From: Moncton , New Brunswick
Default Tuesday!!

Common BigSlick it's Tuesday ............... PICS? hahahaha
 
Reply



All times are GMT -4. The time now is 07:52 PM.