When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
If they're actually screwed through the fender you shouldn't have a problem with lining them. However I'd be curious of the makeup of the plastic, and weather or not the strength/chemical makeup of the plastic would take it.
If it were me I would rubberize them. If that doesn't look nice, strip it and start over!
If they're actually screwed through the fender you shouldn't have a problem with lining them. However I'd be curious of the makeup of the plastic, and weather or not the strength/chemical makeup of the plastic would take it.
If it were me I would rubberize them. If that doesn't look nice, strip it and start over!
Truck looks good, I think that is one of the few trucks with flares I actually like the look of, might want to consider a body color or black grille now
Such a difference....looks like not doing the axle swap was a good idea
Last edited by redheadhunter21; 07-02-2010 at 08:04 AM.
thanks! I am painting my mirrors and grille black along with my axles and such.. then im herculining my bed, the rockers, and possibly the interior and rear bumper.