Finally got my door panels done. What do you all think? Truck is a little messy, went to the lake yesterday.

 

My front speakers were blown, so while i had the door panels off i replaced the stock ones with some infinity 9622i 6x9's. My only worry is that the back were running off the amp that i took off so i think I will replace them to. Will i have to get a new head unit to push enough power to the back speaker?

 

nice job!! i like that alot

 

looks sweet ! !

the front speakers have the own amp, the rears suck i re wired the amp in the door to power the rear too and put 6x9 in the back , so i have power from both the amps in the dor and the head unit

 

Hey how did you do that, did you put the camo over the carpet **** that was there or did you take it off then put that, also were did you get the fabric

 

Damn son, those look sharp! Not at all my style, but I can appreciate the work that went into those!

 

well that is my style. i wish i could do that, but i got manual windows so that peice is part of the panel. i thought about doin my headliner though, so fill us in step by step.

 

That piece was plastic welded to the door panel so i had to pop it off. The fabric is from a local fabric store, its scent lock clothing for hunting so the elk wont smell you. The fabric is over the stock carpet (I liked the added padding). I just started from the middle with glue (e6000) and worked my way out. I did about 3x3 inch squares because i had to stretch the fabric and wait for the glue to dry. Once i got to the ends I used a staple gun and stapled the ends to the plastic. After that i had to plastic weld the finished piece back on the the bigger panel.

I did about 1/3 of the dash behind the steering wheel until i gave up. Way to many curves.

 

that looks really good, i like it alot! i would really like soem seat covers done like that. its just camo really doesnt fit my red and black ext.

 

im totally gonna try it with my headliner