2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Axle swap and fuel pump swap

Thread Tools
 
Search this Thread
 
Old Oct 26, 2010 | 11:00 PM
  #1  
1998ram5.9's Avatar
1998ram5.9
Thread Starter
|
Veteran
15 Year Member
Joined: Jul 2009
Posts: 378
Likes: 0
From: New York
Default Axle swap and fuel pump swap

I was wondering if a dana 44 out of a 1996 ram 1500 4x4 will fit my 1998 ram 1500 that also has dana 44.

Also would the fuelpump from a 1996 ram 1500 318 fit my 1995 ram 1500 with 318?
 
Reply
Old Oct 27, 2010 | 06:25 AM
  #2  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

There might be some small differences (like the mounting position for the stabilizer links) IIRC, but as long as they are the same gears, you should be fine. As far as the pump goes, there may be a rollover valve issue and the plug might not be the same. They both also need to be the same size gas tank (gallons).
 
Reply
Old Oct 27, 2010 | 09:51 AM
  #3  
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

^really? so i couldnt get a fuel pump from a 95 that has a 35 gal tank? (mines the 26 gallon)

if so, good to know
 
Reply
Old Oct 27, 2010 | 03:12 PM
  #4  
1998ram5.9's Avatar
1998ram5.9
Thread Starter
|
Veteran
15 Year Member
Joined: Jul 2009
Posts: 378
Likes: 0
From: New York
Default

hmm ok so im deffinetly gonna get the axle and hopefully the dodge dealer can tell me if there is a difference in fuel pumps
 
Reply
Old Oct 27, 2010 | 05:14 PM
  #5  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by 1998ram5.9
hmm ok so im deffinetly gonna get the axle and hopefully the dodge dealer can tell me if there is a difference in fuel pumps
Just look them up(fuel pumps) on Rock Auto or some other parts store. But, like I said, you have to know the size of the tanks.
 
Reply




All times are GMT -4. The time now is 01:16 PM.