i need some friggin help, grinding noise....
#11
#12
Well i drained my transfer case and no shavings were in it, I popped out the driveshaft and the snap ring is still in there and fine. The pinion nut isn't backing out. So Idk what it could be I sure hope its not the torque converter. Its so weird how it only does it when I back off the gas to a certain point or.hit the gas at a certain point
#14
yeah well im hoping its on its way out, thatll give me an excuse to finally put in my one ton thats been sitting in my garage the gear fluid in the back is actually all gray so it looks like somethings been taking a crap in there. im guna pull it apart tomorrow before i go to atlantic city for my 21st b day =p
#18
yeah the joints are only about 5 months old anyway, they felt fine. there is some play in the pinion in the back up down side to side. so im going to put my new axle in within the next couple weeks and hope that helps. but i dont understand if it was that why it would only do that when im doing around 55 or above and let off or touch the gas slightly
#19
yeah the joints are only about 5 months old anyway, they felt fine. there is some play in the pinion in the back up down side to side. so im going to put my new axle in within the next couple weeks and hope that helps. but i dont understand if it was that why it would only do that when im doing around 55 or above and let off or touch the gas slightly
#20
d*mn i was really hoping for a OH I KNOW WHAT IT IS and then i got "truck got wrecked before i figured it out" lol got my hopes up for nothing, well im hoping that its either the pinion which ill figure out if its that when the new axle goes in, or if not transfer case is coming apart when i get some time off of work and im guna take a looksie inside