does anyone know if i will run into any problems putting 3rd gen cab lights on a 2nd gen??? I didn't buy the cab lights yet and my truck doesn't have cab lights on it now,, so i would have to drill the holes and what not,,, i just want to know if i will have a problem with the curve of the roof and having gaps between the lights and the cab,,,,,

 

Check this out! From 1994-2011!

http://www.gorecon.com/products.php?p_cat=29

 

The lights will work on a second gen because some of the later second gens actually have the new style of lights. However the mounting template will not match up on the roof. From what I've read, the best bet is to remove the headliner, find the five holes for the cab lights and use those as a guide on where to mount them.

 

Ok,, thank you so much for the info,,, i have to take the headliner down to get it redone anyway... thanks...

 

They are different styles of lights for the different years. It isn't like one light universally fits all years.

 

I have a complete set (OEM) in damn near perfect condition, with factory harness, from my 98 if you are interested.

 

thank you but i was thinking about going with these,,, something a little different

http://cgi.ebay.com/ebaymotors/DODGE-RAM-LED-SMOKE-CAB-ROOF-LIGHTS-DUALLY-TRUCK-_W0QQcmdZViewItemQQhashZitem53e0ebe492QQitemZ36025 5841426QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

 

They got them for Ram 1500 and 2500 between 1994and 2011.

 

I would be interested in those cab lights and harness....

 

I have 3rd gen after market LED Recons on my 2nd gen..But I installed them different them most ppl do.. most 3 center lights are closer and the outside 2 are farther.. I did mine almost even all the way across..