When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Its definantly not an offroad and would like to see some pics of the body lift cause it doesnt look like it has one in the pic and its pretty rare for a newer sport to have one done
yeah it is stock, im looking at a 5in rough country lift and it has 4 in blocks for the back, and my truck already has 3 inch blocks so it wouldn't lift it much ?
The lift blocks would be in addition to the stock blocks...... not instead of. Stacking blocks seems to be rather popular with the lift companies.... I had always thought that was a bad idea...... with reason.
May not hurt... according to popular theory is isn't really 'necessary'..... My major malfunction with the whole thing is having 7+ inches of block giving the axle some fairly serious leverage on the springs. This is just begging for a bad case of axle wrap/wheel hop..... especially with bigger, heavier tires.
My suggestion would be to lose the rear blocks that come with the kit entirely, and go with either an add-a-leaf, or, custom spring pack. Don't bother just having yours re-arched.... that only lasts a year or so, and then they settle rather quickly. Especially if you carry any kind of load in the bed.