50 or 52 throttle body 5.9
Ok so i have a pretty stock 5.9. CAI, straight piped,soon to be kegger mod. I was wondering if i were to get a new tb would a 50 or a 52mm be a better way to go for me? Do you gain much power with the kegger and bigger tb? I am trying to get more low down power instead of power after 3k. I know i should get a tune but its out of my budget.
Last edited by smcandrew08; Dec 10, 2010 at 06:15 PM.
I guess i should have said for right now a tune is out of the price range. I am going to get a tb for 100 from the guy in the forums that does bores the stock ones out not the 400 dollar ones.
I know you dont want to hear this but there is probrably 100 threads on just this and there is a poll in the FAQ section, so a little search and you will hours worth of stuff to read
Trending Topics
RedHeadhunter is right, this fourm has a rediculus amount of threads about TB's and modding them. Dodgeram07 did a nice DIY write up on boring the TB. You can really do it yourself, and save the 100 bucks. I did mine in a total of 2 hours start to finish,including the drive to my local machine shop to have them bore it out.
even if you dont want want to buy one, you can just dremal off the horns off the throttle body that blocks the air.
also sct is bang for the buck for starter mods to wake up these trucks ! then start with CAI 1.7,highflow cats ext...
also sct is bang for the buck for starter mods to wake up these trucks ! then start with CAI 1.7,highflow cats ext...
Ok what made you go with a 52 tb instead of 50?



