Looking for the best lift for a 99 Ram 4x4?
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
I can't vouch for it, but I had a body lift (PA) and a coil spacer combo on my 2nd Gen and I don't recall anyone I know who has one. Maybe BigRedOne can give specifics as to what he says the issues are with the kit for the 2nd Gens.
It still doesn't change the fact that the company is having money issues though...
Professional
Joined: Nov 2010
Posts: 135
Likes: 0
This come from the rep from fabtech.
Installation of the kit requires that you weld the track bar bracket and
support tube into place. You must also weld new control arm pivot bracket
plates to the frame. Fabtech has you cut off the old lower mounts and then
plate in the open space.
Installation of the kit requires that you weld the track bar bracket and
support tube into place. You must also weld new control arm pivot bracket
plates to the frame. Fabtech has you cut off the old lower mounts and then
plate in the open space.
Thread Starter
|
Registered User
Joined: Jan 2011
Posts: 7
Likes: 0
From: Tucson, AZ
Thanks to everyone for the advise to my question about a good lift for my 1999 2500 4x4. All the local shops want to push the Fab Tec lift on me I have heard that they are not so good from more than one source why is that?
Last edited by SGTROSSO; Feb 15, 2011 at 11:31 PM.
Thread Starter
|
Registered User
Joined: Jan 2011
Posts: 7
Likes: 0
From: Tucson, AZ