Im gettin parts together to do my plenum and was wondering where the best place to get the intake bolts from. I checked advance and they want 32 for them. Is that fair price or is there somewhere to get them cheaper.

 

you can get them at the dealer for about 17 bucks i believe.

 

ya dealer is the cheapest

 

Who would have thought...

 

I contacted 2 dodge dealers here in the same town, one wanted $1.45 per bolt and the other want $3.63 per bolt. Same part number etc. Be careful and shop from dealer to dealer, prices do vary alot.

 

So i contacted my local dodge dealer and believe it or not they want .59 cents a piece for them. I couldnt believe that a dealer was cheaper than parts store usually its the other way around. so gonna get those this week and new cap n rotor,180 t stat and start on my plenum gasket. Anything else i should do while intake is off. Is the kegger mod worth the hassle?

 

Since you got the motor halfway apart anyway, change the timing chain.

 

Besides Timing Chain, might look into replacing the water pump. Don't forget the little PITA bypass hose that goes from the plenum to the water pump. I just did a new plate with a Kegger Mod intake. I had the intake, and was able to do it at my leisure. If this truck is a daily driver, and you need to get it back together to get to work, might want to skip it.