When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Upload your pics to someplace like photobucket, or imageshack, then just use image tags with the direct link to the pic. (the square box with the mountain? in it is for image tags.)
Sorry guys, when I changed my plenum (never checked it, just preventative maint), it was so clean that you could eat off it. And my PCV was functioning properly (the pic of my valvetrain I have shown when i did the RRs during the plenum fix).
It was clean steel down there. I would say that one is blown. It should not look like that. Unless you poured oil down your TB.
Could also be that a previous owner cleaned the throttlebody without removing it from the intake. Washing all the debris down into the intake could make it look dirty like that.