2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

HArd start

Old Mar 1, 2011 | 09:19 PM
  #1  
bobracing32's Avatar
bobracing32
Thread Starter
|
Rookie
Joined: Aug 2010
Posts: 56
Likes: 0
Default HArd start

MY truck cranks over for a long time before it starts. Ive cleaned the sensors. Im thinking fuel pressure? I wont put a guage on it. If its a possibility ill just replace it. Any thoughts?
 
Reply
Old Mar 1, 2011 | 09:50 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,388
Likes: 4,212
From: Clayton MI
Default

Why not put a pressure gauge on there and then you will know for sure?? It think the 95's are supposed to be around 40 or so??
 
Reply
Old Mar 1, 2011 | 09:55 PM
  #3  
Mad_Scientist's Avatar
Mad_Scientist
Captain
Joined: Nov 2010
Posts: 632
Likes: 4
From: SE Tx
Default

Originally Posted by HeyYou
Why not put a pressure gauge on there and then you will know for sure?? It think the 95's are supposed to be around 40 or so??
^^^^+10 Randomly throwing parts at a problem is always a very expensive solution (especially with a problem such as yours--many costly parts could be the culprit)
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:25 PM.