I know this, I drive a lowered truck lol. And I work out of it every day of the week.

Old pic

 

Oops here you go.
http://www.ramforumz.com/showthread.php?t=47061

 

Yikes, well I know for a fact that srt 22's and a 4/6 drop on my truck won't work. But hope it does for him.

 

A little rubbin never hurt lol, my 35's rub at full lock.

 

97tn4x4 thanks followed the link and found a 96 ram that did more than a 4/6 and is running the srt rims and says he has no problem with rubbing.

 

No problem. Make sure yOu post some pics when you're done.

 

A friend of mine has a ss/t with a 2/4 drop, when he bought it....it was sittin on some 22's and they rubbed just a bit at full lock, he took them off and put the stock rims back on

 

Stock wheels don't have the proper backspacing to keep from rubbing.

 

I have a 95 Ram 1500 short bed.
Was lowered before I got it.
The Lower A-arms are too close to the ground. Looks like they cut springs too short. Then tried those spacers to lift a bit, but didnt work.
Looks like the rearend was just moved from the bottom to top side of the leaf springs. Shackle mounts are untouched.
I just want the right spring for the front to make it set right. Not wanting factory height cause I like the lowered look.
Thanks for any help or Input.
Jeff