When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
ok thinking about doing a triangulated four link in the rear and using the stock front coils as rear coils or i can custom make a bracket to move my shackle down and use a longer shackle in place of the revolver shackles. what ya'll think? i can do a triangulated four link for 800 bones
If your going that far with it, ditch the lift and get a set of custom coil-overs, three link in the rear and four link in the front. Just save up your money for the coil-overs.
thats what my buddy said and he just built a triangulated four link for his rock buggy three months ago. he said the johnny joints are only 25 a peice so 175 for 7 of those i'm not sure on what material he was planning on using but the links he made on his buggy are 2" dia so the are pretty freakin beefy looking.
You can buy 2" od 1/4" wall tubing in a 20 foot stick for less than 50 bucks. More like 300. And 25 a piece for heim joints is crazy lol. I built a 4link for a truck I bagged for like 100 bucks.