95 & 96 Service Manuals for Download
Thread Starter
|
Record Breaker
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN
EDIT: I finsihed bookmarks in both manuals.
The 95 manual is missing about 20 pages.
I am going to contact the company i got it from
and see if i can get those pages.
Dave
The 95 manual is missing about 20 pages.
I am going to contact the company i got it from
and see if i can get those pages.
Dave
Last edited by xjarhead69; Aug 9, 2011 at 05:30 PM.
Registered User
Joined: Feb 2018
Posts: 1
Likes: 0
1995 Dodge Ram 1500 5.2ltr good spark at coil NOT at plugs
1995 Dodge Ram 1500 5.2ltr has good spark at coil NOT at plugs
I have replaced CPS, TPS, IAC, Coil, Cap & Rotar, Cam Sensor, and checked the Fuses. Fuel pressure is good, Fuel pump turns on
Check engine light does not come on at all even at key turn before cranking. Maybe bulb? not sure
We checked the timing of the crank by hand cranking the engine around several times & timing marks all line up every time.
WE cant figure out why we are NOT getting spark at the plugs?
Truck ran fine until I put it in cruise control one day heading home about an hour away. Truck was heading over bridge and it went into passing gear on its own, due to the steep slope of the bridge. I quickly tried to step and even stomp on the gas pedal to get it out of passing gear. It wouldn't listen or stop until many foot pedal kicks. Then it ran like crap all the way home. Hasn't ran since. We have replaced all the things listed above and are at a lose. Could really use some good advice. Thank you!!!
I have replaced CPS, TPS, IAC, Coil, Cap & Rotar, Cam Sensor, and checked the Fuses. Fuel pressure is good, Fuel pump turns on
Check engine light does not come on at all even at key turn before cranking. Maybe bulb? not sure
We checked the timing of the crank by hand cranking the engine around several times & timing marks all line up every time.
WE cant figure out why we are NOT getting spark at the plugs?
Truck ran fine until I put it in cruise control one day heading home about an hour away. Truck was heading over bridge and it went into passing gear on its own, due to the steep slope of the bridge. I quickly tried to step and even stomp on the gas pedal to get it out of passing gear. It wouldn't listen or stop until many foot pedal kicks. Then it ran like crap all the way home. Hasn't ran since. We have replaced all the things listed above and are at a lose. Could really use some good advice. Thank you!!!
Registered User
Joined: Dec 2018
Posts: 1
Likes: 0
I have posted on google docs. the service manuals for 95 & 96.
I am adding bookmarks as I have time good portion of the 96 is complete, its very time consuming.
I will upload them again as i finish them or you can add your own bookmarks.
Here is the 96 manual https://docs.google.com/leaf?id=0B0E...ut=list&num=50
Here is the 95 manual https://docs.google.com/leaf?id=0B0E...w&hl=en_US.The.
95 should cover 94 also and the 96 should cover 97 too, not sure about anything latter.
I will post again when they are completly updated with bookmarks.
Maybe these could be added to the Faq's section with the 2001 manual.
Enjoy!
EDIT: I finsihed bookmarks in both manuals.
The 95 manual is missing about 20 pages.
I am going to contact the company i got it from
and see if i can get those pages.
Dave
I am adding bookmarks as I have time good portion of the 96 is complete, its very time consuming.
I will upload them again as i finish them or you can add your own bookmarks.
Here is the 96 manual https://docs.google.com/leaf?id=0B0E...ut=list&num=50
Here is the 95 manual https://docs.google.com/leaf?id=0B0E...w&hl=en_US.The.
95 should cover 94 also and the 96 should cover 97 too, not sure about anything latter.
I will post again when they are completly updated with bookmarks.
Maybe these could be added to the Faq's section with the 2001 manual.
Enjoy!
EDIT: I finsihed bookmarks in both manuals.
The 95 manual is missing about 20 pages.
I am going to contact the company i got it from
and see if i can get those pages.
Dave
Thank you for providing the link for the 96 manual.
Helpful.with one exception.
I am looking for information on how to replace the license plate lamp, and it does not explain how to change the bulb
Legend
Joined: Nov 2014
Posts: 8,098
Likes: 318
Two screws, pull the housing out and replace the bulb
