2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1/4 mile and 0-60mph times

Thread Tools
 
Search this Thread
 
Old May 9, 2011 | 04:03 PM
  #1  
sinus19's Avatar
sinus19
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 472
Likes: 0
Default 1/4 mile and 0-60mph times

So yesterday I sold my Superchips because im going to get an SCT by Hemifever () and decided to do one last tuning to be able to compare my current results with the new SCT tune.
with that said, I was tunning the spark plug timing with my Superchips and decided to go with -3.00 Degrees instead of 0 deg. anything lower than -5.00 deg, i would get spark plug knock. Also changed tune to 91 oct since i had 93 oct.
After tuning, I headed out to the country side roads and did a 1/4 and 0-60 (used Superchips data logging) and here are my results:

Bone Stock (8 months ago, dont remember EXACTLY the numbers since i deleted the records )
1/4 18.42
0-60mph 12.00

Current mods (look at signature)
1/4 17.01 @ 77mph
0-60mph 10.73

Cant wait till i get the SCT by Hemifever! I'll post results as soon as i get it
 
Reply
Old May 9, 2011 | 07:19 PM
  #2  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

you will probably get only .30 seconds faster with the SCT (you ALREADY have a superchips).

Which means any honda out there will still blow your doors off. But, keep modding and don't break anything.

Looking at my sig, I probably run 16.5.
 
Reply
Old May 9, 2011 | 07:22 PM
  #3  
matty675's Avatar
matty675
Record Breaker
Joined: Feb 2010
Posts: 1,504
Likes: 1
From: Chesapeake, VA
Default

yea, dont stop with a tuner. a tuner can only optimize what you HAVE!

airflow is critical! (cam/heads)
 
Reply
Old May 9, 2011 | 07:43 PM
  #4  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

Cam is too big a job for me. Already had a bad experience with a chevy and a cam swap. It had 280* duration and over .5 in lift. More with the 1.6 RRs I had on the chevy. I ended up wearing a lobe down to nothing, had to redo it.
 
Reply
Old May 9, 2011 | 07:44 PM
  #5  
sinus19's Avatar
sinus19
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 472
Likes: 0
Default

true, it just seems quite slow? Im sure removing Torque Managment will help, right?
 
Reply
Old May 9, 2011 | 11:21 PM
  #6  
dodgeman2289's Avatar
dodgeman2289
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

Mine was 8.2 hypertech and with sct bought the same. Only cause i cant punch it on take off. Cant get traction burn out through 2nd gear. Hypertech only made me chirp
 
Reply
Old May 9, 2011 | 11:26 PM
  #7  
Mowhawk's Avatar
Mowhawk
Record Breaker
Joined: Oct 2007
Posts: 1,680
Likes: 0
From: Allentown, PA
Default

1/4 14.73
 
Reply
Old May 9, 2011 | 11:29 PM
  #8  
RamSport97's Avatar
RamSport97
Record Breaker
Joined: Jul 2008
Posts: 1,210
Likes: 0
From: Crystal River, FL
Default

I am not sure what my quarter is but my 0-60 is 7.8, recorded with aDyno app and a digital stop watch.
 
Reply
Old May 9, 2011 | 11:30 PM
  #9  
dodgeman2289's Avatar
dodgeman2289
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

0-60 was 8.2 hypertech. 1/4 was 16.01 note was not on a actual track was timed on a ipod.. not accurate.

No runs with sct
 
Reply
Old May 10, 2011 | 04:49 AM
  #10  
95Erokram's Avatar
95Erokram
Veteran
Joined: Nov 2010
Posts: 267
Likes: 0
Default

8.2 With trans stock and 3.55's granted it was a nice 50 degrees outside and im only rocking 31 10.5 with 15 inch rims. After the mopar pcm, oil change, air filter cleanse and getting my truck from the shop with my perf sports trans build I want to see 7.5 and under. Think thats possible? I do have a lot to make my truck move that fast though. and for a 5.2 i lose a bit for traction loss at the initial punch. Stock trans went bad shortly after doing this at every stoplight lol. Possibilities.. modded kegger and 3.92's or better that previous owner could have done.. and motor was rebuilt 20k miles ago by the owner although i think it was a stock rebuild. kinda want to know if anything was done. my low end is awesome
 
Reply



All times are GMT -4. The time now is 06:25 AM.