2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Cruise Control quit on me.

Thread Tools
 
Search this Thread
 
Old May 14, 2011 | 10:22 AM
  #11  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

Originally Posted by SpencerS
Yea the vaccume on my ram is broke and brittle in alot of the line so i am going to replace that line. Is there any change if my ABS light is on only some of the time? How do i fix that?
cruise control operation needs a speed sensor signal from the computer (and trans) to work right. fix any vac lines first. if it still doesn't work, or you get ABS light, consider the speed sensor in the tail shaft of trans/tcase, its about $15-20.
 
Reply
Old May 14, 2011 | 10:26 AM
  #12  
ShelbyGT550's Avatar
ShelbyGT550
Professional
Joined: May 2011
Posts: 198
Likes: 0
From: Echo bay, Ontario
Default

My fathers 1995 ram did the same thing, worked one day and the next it would not engage, turned out to be the vacuum line under the battery fell apart
 
Reply
Old May 14, 2011 | 05:33 PM
  #13  
AZJOE's Avatar
AZJOE
Registered User
Joined: Apr 2011
Posts: 13
Likes: 0
From: Tucson AZ
Default

Same here, corrosion from battery damaged vacuum line.
 
Reply
Old May 14, 2011 | 07:06 PM
  #14  
99ram15005.9's Avatar
99ram15005.9
Thread Starter
|
Amateur
Joined: Dec 2010
Posts: 43
Likes: 0
Default

Well i just found my problem the little hose going into the intake had came off, now it works just like normal thanks guys
 
Reply




All times are GMT -4. The time now is 04:41 AM.