OK I know exactly what your going to say... "NOOO" but hear me out.

I am keeping the stock WHEELS however need the spacer outside of the wheel to separate my spinners. Yes I have chrome spinners. Make fun of me all you want. I won them 10 years ago in a car show, and they are like $1000 spinners. They happen to fit the look and diameter of my stock truck wheels perfectly. I decided to buy a 2nd truck for offroading, so this is going to be a gawdy occaisonal DD.

I used to have spacers/adapters on my F150 years ago to run a set of aftermarket wheels on it. I can find 5 lug to alternative 5 lugs on ebay, but I can't find a 5 lug to 4 lug... which you'd never want to do for WHEELS, but should be fine for HUBCAPS. Any idea where I could buy these/have them made? Since this is just for fun I don't want to spend more than a few hundred bucks. The only alternative is I might try making them out of fiberglass?

Thanks!

 

Don't use fiberglass, the side loading would break them, and your spinners would go for a ride they would not much care for.

All an adapter is, is a circle with the right inside/outside diameters, with holes in the right places. You should be able to have a machine shop make some up for you for not too much.....

 

Yeah a machine shop or even call up one of the places on ebay and see if they could make you some custom ones with the lug pattern you need

 

I'm not seeing how this would be possible. The two patterns won't overlap without sharing a bolt hole and even then you won't have room for lug nuts on some of the studs.

 

NOOOOOOO,

Sorry, had to do it.

 

gotta share pics please!