2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Another ac question

Thread Tools
 
Search this Thread
 
Old May 26, 2011 | 12:33 AM
  #1  
99dodge318's Avatar
99dodge318
Thread Starter
|
Record Breaker
Joined: Mar 2010
Posts: 1,169
Likes: 0
From: Texas
Default Another ac question

well i recharged my ac the other day and now it blowing out 40* air in 100* weather!

one thing i noticed is it sounds like i have a mouse exercise wheel in the "black box" under my glovebox at all fan speeds, also if i shut the truck off with the ac on and restart it the fan wont blow air till you hit/kick the "black box" !

also replaced the check valve next to the intake manifold with one out of a universal vac line kit, i still have wacky vents!

is that black box the blower motor?
are they a pita to replace?
and should i get the check valve T from the dealership?
 

Last edited by 99dodge318; May 26, 2011 at 01:13 AM.
Reply
Old May 26, 2011 | 07:24 AM
  #2  
Novarider's Avatar
Novarider
Captain
Joined: Feb 2011
Posts: 507
Likes: 0
Default

Take the black box apart and see if anything is in there with the blower. My dads durango blower motor was making noise and when we pulled it there were several leaves in there that the fan was rubbing against.
 
Reply
Old May 26, 2011 | 09:35 AM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,385
Likes: 4,211
From: Clayton MI
Default

Yep. Blower motor is in there. It's either going to be something in there, as mentioned above, a failing blower motor, or, a failing resistor block. If you have to kick the box to get the fan going on any speed setting, probably time for a new blower motor.
 
Reply
Old May 27, 2011 | 02:54 AM
  #4  
99dodge318's Avatar
99dodge318
Thread Starter
|
Record Breaker
Joined: Mar 2010
Posts: 1,169
Likes: 0
From: Texas
Default

quess i have to go through the old service manual and see how hard it is to yank out, and where to start

thanks for the replys
 
Reply
Old May 27, 2011 | 09:16 AM
  #5  
kd5taa's Avatar
kd5taa
Rookie
Joined: Jan 2011
Posts: 59
Likes: 1
From: North Carolina
Default

I pulled mine last weekend in just a couple hours, wasn't bad at all. If you remove it completely you'll have to evacuate and recharge your a/c though....

There's a really good DIY with pics on the heater core that will walk you through the removal.

https://dodgeforum.com/forum/2nd-gen...ater-core.html


I dont think you have to pull it out though man, I would just drop the blower motor and stick a shop vac up in the box or just sweep it with my hand.
 

Last edited by kd5taa; May 27, 2011 at 09:22 AM.
Reply




All times are GMT -4. The time now is 11:38 AM.