2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

abs, brake and infromation light come on at 60 kph or 40 mph

Thread Tools
 
Search this Thread
 
Old Jun 5, 2011 | 08:31 PM
  #1  
subzeroschmidt's Avatar
subzeroschmidt
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 2
Likes: 0
Default abs, brake and infromation light come on at 60 kph or 40 mph

abs, brake and infromation light come on at 60 kph or 40 mph

- this happened when my brake controller ** up
- had to pull over with trailer brakes on ...
- it is disconnected for now
- check all fuses
- pulled plug out of top of rear end thinking it is was the speed sensor and drove around the block speed still worked..
- pushed that plug in and out a few times to make a new connection
- light still comes on at 60 kph or 40 mph

any ides ???
 
Reply
Old Jun 6, 2011 | 12:54 AM
  #2  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Welcome to DF, subzero.

First, before anything else, please read this. After you've read that and posted the info we need here, we can begin to help you properly.
 
Reply
Old Jun 6, 2011 | 10:29 PM
  #3  
subzeroschmidt's Avatar
subzeroschmidt
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 2
Likes: 0
Default

1997 - 1500 gas 5.2

and is 2 x 4
 

Last edited by jasonw; Jun 8, 2011 at 01:49 AM. Reason: Merging double posts.
Reply
Old Jun 8, 2011 | 01:49 AM
  #4  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Its actually a 4x2. A 2x4 is a block of wood.

I will move this over to the 2nd gen section, get you some help (2nd gen = 1994-2001 Dodge Rams). Once again, welcome to DF.
 
Reply
Old Jun 8, 2011 | 11:09 AM
  #5  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Default

Replace the sensor in the diff.
 
Reply




All times are GMT -4. The time now is 01:38 PM.