2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

P 1494 code?

Thread Tools
 
Search this Thread
 
Old Sep 1, 2011 | 12:49 AM
  #1  
jesssed's Avatar
jesssed
Thread Starter
|
Amateur
Joined: Apr 2007
Posts: 41
Likes: 0
From: East Texas
Default P 1494 code?

I looked up the code on the FAQ sheet "leaking pump switch or mechanical". what does this mean?

thank you

Jesse D.
 
Reply
Old Sep 1, 2011 | 01:13 AM
  #2  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

P1494 is a vac leak in/around the evap system. on my 01 its on the passenger side fenderwell, right behind the headlight. check all those vac lines for cracked ends. disconnect each one and look for swelling or cracks. for a quick fix you can likely cut off an inch or so of any that are cracked.

turn of cel by disconnecting negative batt cable and turning on headlights for 30 sec. if its still leaking, cel will come back on in about 3 days.

one of 1000's of google hits.
http://www.fixya.com/cars/t2438036-r..._dodge_caravan
 
Reply




All times are GMT -4. The time now is 06:27 PM.