2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Heater Hose Replacement

Thread Tools
 
Search this Thread
 
Old Sep 5, 2011 | 03:16 PM
  #1  
codydog's Avatar
codydog
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 7
Likes: 0
Default Heater Hose Replacement

Finished the heater core replacement on my 98 Ram, 5.9, 4 X 4, auto, air. I can't find a replacement for the heater hose, on the left side of the engine that goes from the water pump ( ? ) to the heater coil. It's 2 part and nobody seems to list or carry the part that connects to the engine. Rock auto does carry a part listed as a bypass hose. Goodyear 63333 engine coolent by pass hose. Seems crazy this should be a problem. Thanks
 
Attached Thumbnails Heater Hose Replacement-heater.jpg  
Reply
Old Sep 5, 2011 | 03:20 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,391
Likes: 4,213
From: Clayton MI
Default

Just use one piece of hose that is the correct size. If you already have both the soft hoses, and are only lacking the union... grab one from a junkyard, or, re-use you old one, if you can.
 
Reply
Old Sep 5, 2011 | 03:25 PM
  #3  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

get the ones from Rock Auto. All you really care about are the ends that are prebent to 90 degrees. You can do anything you want in between,
 
Reply
Old Sep 5, 2011 | 03:48 PM
  #4  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

passenger side needs a 90* on the manifold end and a straight end at the core.
IIRC drivers side needs a straight or 45* ? at the water pump and a 90* at the core.

i took my old hoses to the parts store and just bought 2 new ones that had the same general shape. i have no idea what they were actually for. i also bought 2 dorman 5/8 heater hose couplers and spliced those right in the middle of both sides for easy heater core flush.
 
Reply




All times are GMT -4. The time now is 10:00 AM.