94 ram prerunner / mid travel project
#12
lol. no there isnt. when the previous owner cut the bed cage off the upper shock mounts went with. im holding off putting upper mounts on untill i figure out what will be best to do with the rear suspension, and honestly its so stiff in the rear it has absolutely no affect on the drivability lol
#13
#14
#16
#17
this is just stuff I see taht I would work on, jus my .02
bottom a arms seem a little on the weak side, id run a skid plate from the very front of the frame down and under the ifs, truss the rear axle, and take that coil and front shock out and put in a real coil over.
for ur stiff rear end
http://www.thecarlisuspension.com/do...pringpack.html
bottom a arms seem a little on the weak side, id run a skid plate from the very front of the frame down and under the ifs, truss the rear axle, and take that coil and front shock out and put in a real coil over.
for ur stiff rear end
http://www.thecarlisuspension.com/do...pringpack.html
#18
Rear springs are 2.5 inches wide
Rear springs are way stiff I was thinking about losing a leaf just unsure which one
I know shocks will help but on the other hand its so stiff there is no travel for the shockmachines to rebound lol
I have also yet to take it off road due to a dieing posi unit and I need new front controls arm bushings and limiting straps
Im waiting to do the shocks until I get the setup and ride height figured out. Its a little high in the rear.
And yes skid plate deffinitly...
Rear springs are way stiff I was thinking about losing a leaf just unsure which one
I know shocks will help but on the other hand its so stiff there is no travel for the shockmachines to rebound lol
I have also yet to take it off road due to a dieing posi unit and I need new front controls arm bushings and limiting straps
Im waiting to do the shocks until I get the setup and ride height figured out. Its a little high in the rear.
And yes skid plate deffinitly...