2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Took a chance, here it is.

Thread Tools
 
Search this Thread
 
Old Sep 10, 2011 | 01:34 PM
  #1  
Vader's Avatar
Vader
Thread Starter
|
Champion
Joined: Dec 2003
Posts: 4,740
Likes: 0
From: Death Star
Default Took a chance, here it is.

In a previous thread I posted how I had to downgrade from my 06 Hemi QC Ram 4x4 to a 98 Ext Cab 5.2 4x4.

I felt I overpaid for the truck but did so because the body is mint. It is a one owner with 198k on the original motor, tranny, and plenum. The service list is a mile long and it was well cared for.

I have done the following:

2 inch spacer up front, 1.5 blocks for the rear.
Yokohama Geolander 285 75 16
4 freeze out plugs
sway bar end links
Replaced the rear main seal and oil pan gasket

It is running great and I am keeping my fingers crossed

 
Reply
Old Sep 10, 2011 | 01:39 PM
  #2  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Nice looking truck. I'd fix the plenum before you end up with cracked heads. I got mine with 78K and the plenum gasket was blown.
 
Reply
Old Sep 10, 2011 | 01:51 PM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,385
Likes: 4,211
From: Clayton MI
Default

Nice truck. I only wish mine were in that good of condition. (body)
 
Reply
Old Sep 10, 2011 | 02:10 PM
  #4  
Vader's Avatar
Vader
Thread Starter
|
Champion
Joined: Dec 2003
Posts: 4,740
Likes: 0
From: Death Star
Default

Thanks guys, the interior (leather) is in fantastic condition as well (minus the cracked dash). We are going to do the plenum but I am also going to rebuild another 5.2 just in case.


The only thing that is really pissin me off is the damn ABS/Brake light on my 4wal system. Dealer read it and every brake code showed. Funny thing is that I tested the anti lock and it works just fine.
 
Reply
Old Sep 10, 2011 | 04:38 PM
  #5  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Mine had a bad connection at PCM.
 
Reply
Old Sep 14, 2011 | 06:42 AM
  #6  
Vader's Avatar
Vader
Thread Starter
|
Champion
Joined: Dec 2003
Posts: 4,740
Likes: 0
From: Death Star
Default

I'll check that, thanks!
 
Reply




All times are GMT -4. The time now is 12:49 PM.