When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
If yours is the same as mine you should be able to see adhesive if you look closely at the sides that is all the holds mine on its like the rubber trim on the doors, Just adhesive. Have a look and let me know if yours is the same.
I'll try to peel back a corner and see. I was almost afriad to as I am afraid the plastic would shatter. But I plan to remove it so if it breaks, it's no great loss.
Black plastic piece? Nothing black or plastic now. 18 gauge steel rollpan. I did a little hammering to make it fit in there right, then i used some stainless sheet metal screws to hold it in 8 on the top and 2 on each side in the inside of it