will 99 durango trans fit my 96 ram
Thread Starter
|
Registered User
Joined: Mar 2010
Posts: 37
Likes: 0
From: nj
will 99 durango trans fit my 96 ram
I know they are probably different but will they bolt upp? any chance?
durango :99 5.2 318 4X4 vin 1B4HS28Y2XF561629
ram: 96, 4x4 5.9 360
basically i'm getting the whole durango for 300 and was hoping i could use this trans.
anyone know what else would fit? I need this in my truck,
axels, torque converter,
any of this compatable?
durango :99 5.2 318 4X4 vin 1B4HS28Y2XF561629
ram: 96, 4x4 5.9 360
basically i'm getting the whole durango for 300 and was hoping i could use this trans.
anyone know what else would fit? I need this in my truck,
axels, torque converter,
any of this compatable?
Administrator
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
I don't think the axles will work.... different widths. (not even sure what axles they used in the Durango's......)
Trans will physically bolt up, but, some of the wiring for the sensors/solenoids changed, so, you would prolly have to find out exactly which ones, and replace them with the correct units.
Torque converter may also not work. There was a changover from using the flywheel (drive plate, whatever) as the balancing component, or the torque converter, not sure what year that changed.
Trans will physically bolt up, but, some of the wiring for the sensors/solenoids changed, so, you would prolly have to find out exactly which ones, and replace them with the correct units.
Torque converter may also not work. There was a changover from using the flywheel (drive plate, whatever) as the balancing component, or the torque converter, not sure what year that changed.
