Whats everyone running in their guage pods
Amateur
Joined: Jan 2010
Posts: 40
Likes: 0
From: adrian
in tow pig has egt boost oil pressure, and tranny temp
in the bogger volt tranny temp oil pressure
a mechanical oil pressure and tranny temperature are too very important one.if you have a gas motor put a vac gauge in lower the numbers more cash in your pocket for mpg
in the bogger volt tranny temp oil pressure
a mechanical oil pressure and tranny temperature are too very important one.if you have a gas motor put a vac gauge in lower the numbers more cash in your pocket for mpg
All Star
Joined: Mar 2011
Posts: 780
Likes: 21
From: Milford NH
for the 94-01 trucks, it looks like all the pillar pods go over the factory pillar, rather than repalce it from what I can see on the different vendor sites. It also looks like you need to cut up the factory pillar if you have the infinity speaker up there. Is this correct?
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
The single pod I bought for a 99 doesn't fit very well May try to refit with heat gun. if this doesn't work, I may try a double pod pillar repalcement from LMC. It is the only pillar replacement I have been able to find for a 99. It comes in black, so will have to be painted.
Amateur
Joined: Jan 2010
Posts: 40
Likes: 0
From: adrian
for the 94-01 trucks, it looks like all the pillar pods go over the factory pillar, rather than repalce it from what I can see on the different vendor sites. It also looks like you need to cut up the factory pillar if you have the infinity speaker up there. Is this correct?
i bought mine off ebay and it replaces the whole unit 2 black slim screws later its in perfect. and thats a 3 pillar pod at a total cost of 28 bucks.
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
for the 94-01 trucks, it looks like all the pillar pods go over the factory pillar, rather than repalce it from what I can see on the different vendor sites. It also looks like you need to cut up the factory pillar if you have the infinity speaker up there. Is this correct?
Mine looks like crap because I messed up the measurement so there is about 1/4 inch of "telescope" because I messed up the cut.
ANd about 3 gauges looking tacky...it is only tacky if you have gauges in your pillar that you can see in your stock gauge bezel. Like water and oil pressure. I have AF and tranny temp.
CHEAPEST price for an autometer digital wideband AF gauge: 188 bucks. Summitt wanted 260! I got a 40 dollar discount because I bought it when autometer was having a rebate!
http://teamc.com/i-5047337-auto-mete...ratio-kit.html
They actually have some good prices on their site!
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Where on ebay (specific seller)? I paid 55 bucks for mine and it was a do it yourself gig. Does it come with a provision for the infinity speaker?