Installing KATs circulating coolant heater
#11
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Here are hte pics:
MOUNTING
Inside front frame right by bumper. There was a little divit and it fit in there like a glove. I used 5/16 self threading screws and a pneumatic drill to get them in. Used a rachet to get them all the way in.
![Name: IMG_1999.jpg
Views: 2767
Size: 148.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/61329d1501330384-installing-kats-circulating-coolant-heater-img_1999.jpg)
T-Fitting
My truck had it already spliced from the factory with a fitting in there. Thought it might have been a valve, but it wasn't. The T-fitting is supposed to be facing the unit, so that is why mine is facing towards the front of the truck.
![](http://i1028.photobucket.com/albums/y346/cptafw163/IMG_2000.jpg)
Routing from T fitting to the unit:
![Name: IMG_2003.jpg
Views: 1882
Size: 178.7 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/61330d1501330384-installing-kats-circulating-coolant-heater-img_2003.jpg)
Drain Plug: Straight shot to the unit
MOUNTING
Inside front frame right by bumper. There was a little divit and it fit in there like a glove. I used 5/16 self threading screws and a pneumatic drill to get them in. Used a rachet to get them all the way in.
![Name: IMG_1999.jpg
Views: 2767
Size: 148.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/61329d1501330384-installing-kats-circulating-coolant-heater-img_1999.jpg)
T-Fitting
My truck had it already spliced from the factory with a fitting in there. Thought it might have been a valve, but it wasn't. The T-fitting is supposed to be facing the unit, so that is why mine is facing towards the front of the truck.
![](http://i1028.photobucket.com/albums/y346/cptafw163/IMG_2000.jpg)
Routing from T fitting to the unit:
![Name: IMG_2003.jpg
Views: 1882
Size: 178.7 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/61330d1501330384-installing-kats-circulating-coolant-heater-img_2003.jpg)
Drain Plug: Straight shot to the unit
![Name: IMG_2001.jpg
Views: 2214
Size: 167.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/61331d1501330384-installing-kats-circulating-coolant-heater-img_2001.jpg)
#15
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
To the core (on the left) and to the motor (on the right). It said that the fitting was supposed to face the unit. But the water goes from the ehater core to the motor, so I don;t know what the big deal would be.
#18
#19