I think the bell housing are different on the v8, v10 and cummins motors.

 

Yes they are. V8 bellhousings are rare used... but cost $200 new from a dealer.

 

Why aren't people selling stuff like that in Florida? I'd buy that so fast.

 

I goofed up on the input shaft info. The pilot tip diameter is the same width on the HD and the LD so It seems to me you could use the HD trans as it comes from the factory, keeping in mind to order a clutch for a v10/diesel.

 

What dealer around here sells bellhousings for that cheap

 

Bought mine at Landers in Bossier

 

Dang man landers is usually wayy over priced

 

I also bought a new Tcase tailhousing (the one with the bearing, not the outer piece) from them for about $170. Those are the only parts i've bought fromt them, but in my experience so far they have been good people. A brand new cast aluminum bellhousing for $200? Can't beat that man, thats a lot of materiel, and a pretty oddball part for that price.

 

lol yea, but just fyi always call herbert town and country before you pick somethin up from landers, there usually alot cheaper

 

Im pretty sure i did, can't remember, but i will keep it in mind. Thanks man