2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

315/75/16...what to expect???

Thread Tools
 
Search this Thread
 
  #71  
Old 11-06-2011 | 01:12 AM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

Originally Posted by Wh1t3NuKle
This thread will give you one source to your question.
Posting fubar. Didn't put a link to the intended thread. lol


https://dodgeforum.com/forum/2nd-gen...and-4-56s.html
 
  #72  
Old 11-06-2011 | 01:17 AM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

Originally Posted by haXer
But my question here is that the truck currently has factory 16" rims on it and 31.5 tires, they scrub a little when turning. ( I have yet to drive the truck on the road due to the engine knock). However the build sheet I got back from Chrysler (thanks to this forum) says the truck came with LT265/70R17E size tires and rims. If it now has the stock looking 16" chrysler rims on it ( somebody must have changed it in the past) what size tires do I need to get in 16" to make the speedo and clearence issues be correct? It has the 4.10 gears in it that I verifed personally if that helps.
1. Welcome to DF haXer!! Nothing to hold against you know that you got a Dodge in your hands.

2. Correct that your truck came stock with 17" wheels. So those 16" must pushed out a bit right?

To answer your question, use this site to perhaps help you out:

http://www.dakota-truck.net/TIRECALC/tirecalc.html

I'm not into guessing this late what your current tire size is.
 
  #73  
Old 11-06-2011 | 07:17 AM
Novarider's Avatar
Novarider
Captain
Joined: Feb 2011
Posts: 507
Likes: 0
Default

haXer It sounds like you have the offroad edition. Do you?
 
  #74  
Old 11-06-2011 | 07:22 AM
Novarider's Avatar
Novarider
Captain
Joined: Feb 2011
Posts: 507
Likes: 0
Default

Hey guys what type of shop specializes in axle/gear work?

I'm in the Knoxville area if anyone knows of someone in this area
 
  #75  
Old 11-06-2011 | 11:12 AM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

Originally Posted by haXer
Hello all,
I just got a 2001 Dodge Ram 1500 QC 4x4 off-road with the 5.9

snipped...

ASPP SLT Decor Group
AWKP Travel Convenience Group
AWL Off Road Group

snipped....
Originally Posted by Novarider
haXer It sounds like you have the offroad edition. Do you?
dude
 
  #76  
Old 11-06-2011 | 11:51 AM
Novarider's Avatar
Novarider
Captain
Joined: Feb 2011
Posts: 507
Likes: 0
Default

Lol whoops missed that!
 



Quick Reply: 315/75/16...what to expect???



All times are GMT -4. The time now is 04:16 PM.