2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Transmission question

Thread Tools
 
Search this Thread
 
Old Nov 3, 2011 | 07:02 PM
  #1  
TwistedCage's Avatar
TwistedCage
Thread Starter
|
Rookie
Joined: Nov 2010
Posts: 89
Likes: 0
From: Florida
Default Transmission question

how do i know which transmission controle solenoid i need with out pulling it first. and what is the difference w/ Lock Up Converter; w/ 4 Speed Trans or wo/ Lock Up Converter; w/ 4 Speed Trans
 
Reply
Old Nov 3, 2011 | 10:23 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,379
Likes: 4,210
From: Clayton MI
Default

You have the locking converter. If you are going after the O/D and TCC solenoids, I think most places sell them on the same bracket. Replace them both. Its easier.
 
Reply
Old Nov 3, 2011 | 10:28 PM
  #3  
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 4
From: Bay Area, CA
Default

I think that's the only way they sell them. I've never seen them sold separately...and don't skimp and buy a remanned unit. You'll end up paying dearly in the end. Ask me how I know.
 
Reply
Old Nov 4, 2011 | 07:51 AM
  #4  
TwistedCage's Avatar
TwistedCage
Thread Starter
|
Rookie
Joined: Nov 2010
Posts: 89
Likes: 0
From: Florida
Default

yeah my cel came on for p1740 after my brake line broke and cought fire and I got it back up and running. I have looked over the wires and did not find a burn spot for any of the ones to the trans so I was told that is my next step
 
Reply




All times are GMT -4. The time now is 08:07 AM.