2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Removed plenum, everything is filthy...what to do?

Thread Tools
 
Search this Thread
 
Old Dec 18, 2011 | 05:09 AM
  #11  
ekaplan's Avatar
ekaplan
Professional
Joined: Nov 2011
Posts: 232
Likes: 0
From: West Virginia
Default

What symptoms were you having and how severe? I didn't replace mine and was wondering cuz that looks nasty. I doubt I have the same symptoms since my motor seized yesterday lol
 
Reply
Old Dec 18, 2011 | 10:20 AM
  #12  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,410
Likes: 4,214
From: Clayton MI
Default

If I am decoding that right, he is advocating filling the oil pan with diesel, and starting the engine..... which is an EXTREMELY bad plan. Diesel does NOT have the same lubricating properties as oil, and you will munch up your motor in short order. At the very least, you are going to DRASTICALLY reduce its useful lifespan.
 
Reply
Old Dec 18, 2011 | 10:35 AM
  #13  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

I've not used much kero for cleaning, gasoline seems to do the trick, also works GREAT for getting grease and crap off your hands, if you can stand to smell like gas for a little bit, anyways...

What if he were to drop the oil pan and clean out the motor with gas? Would it work any better then kero or kinda the same?

I put some gas in a degreaser spray bottle, and it works well with a little scrub brush for little hard to reach areas, but I've NOT done this for actual internal motor cleaning.

In my experience gas cleans well so just curious the negative or positive affects of using gas instead of a degreaser or kero.
 
Reply
Old Dec 18, 2011 | 10:38 AM
  #14  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,410
Likes: 4,214
From: Clayton MI
Default

Originally Posted by stewie01
I've not used much kero for cleaning, gasoline seems to do the trick, also works GREAT for getting grease and crap off your hands, if you can stand to smell like gas for a little bit, anyways...

What if he were to drop the oil pan and clean out the motor with gas? Would it work any better then kero or kinda the same?

I put some gas in a degreaser spray bottle, and it works well with a little scrub brush for little hard to reach areas.
I prefer mineral spirits, or kerosene, as they are not quite as volatile as gasoline....
 
Reply
Old Dec 18, 2011 | 10:43 AM
  #15  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Originally Posted by HeyYou
I prefer mineral spirits, or kerosene, as they are not quite as volatile as gasoline....
Safety is always a good idea
 
Reply
Old Dec 18, 2011 | 09:34 PM
  #16  
sk187's Avatar
sk187
Thread Starter
|
Professional
Joined: Nov 2005
Posts: 137
Likes: 0
Default

If I left the oil pan on and cleaned the plenum area and just drained the oil would that be sufficient or do you really need the pan off to get all the cleaning stuff out.
 
Reply
Old Dec 18, 2011 | 09:42 PM
  #17  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

I would drop the pan to get it all out. Plug is not in the lowest part and may leave a half cup to a cup of crud in there. Also, any solids that you flushed into it would still be in pan. Oil pan comes out pretty easy.

And puttin kerosene or diesel in engine and starting to clean out.....can't think of a better way to trash an engine...except run without any oil....
 
Reply
Old Dec 18, 2011 | 09:46 PM
  #18  
sk187's Avatar
sk187
Thread Starter
|
Professional
Joined: Nov 2005
Posts: 137
Likes: 0
Default

Originally Posted by gdstock
I would drop the pan to get it all out. Plug is not in the lowest part and may leave a half cup to a cup of crud in there. Also, any solids that you flushed into it would still be in pan. Oil pan comes out pretty easy.

And puttin kerosene or diesel in engine and starting to clean out.....can't think of a better way to trash an engine...except run without any oil....
I will clean it real good with diesel or something and drop the pan.

Should I refill with cheap oil after the cleaning and run it for a few mins then change again just to get any residue out?
 
Reply
Old Dec 18, 2011 | 09:47 PM
  #19  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Just don't run water into the crankcase with the motor running....
 
Reply
Old Dec 18, 2011 | 10:01 PM
  #20  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Cheap oil? Where do you find that?

It would not hurt to run for a couple hundred miles or so and change oil again just to be sure.
 
Reply



All times are GMT -4. The time now is 09:14 AM.