46RE transmission. Can someone tell me the speed limits that are 'normal' for each speed on this transmission? 1, 2, 3, 4, and overdrive?

Thanks....

 

Depends on how hard you are stepping on the go-pedal. Should shift shortly before redline at WOT.

Do you think you have a problem?

 

4th gear is overdrive and overdrive is 4th gear...

 

The last shift you're feeling isn't actually a shift, it is the torque converter locking up.

 

A video i made awhile back, this is my Jeep 5.9 46re. Sorry for the shakey camera but this should answer your question


http://www.youtube.com/watch?v=Ae3wP...el_video_title

 

Couldn't tell much by video. I did find this while researching some tranny issues. Use the 47RE selection. It will auto fill the gear ratios. You need to enterntire sizes. This may help you determine if you have a problem.

http://www.f-body.org/gears/

(have to paste it into browser - can't create a link from iPad!)

 

you arent very observant if you cant tell the shifts on the video... listen the engine change sounds an watch the rpm's drop 200 or so for the shifts..

 

Kinda shakey ain't the word for it. LOL

 

I think I am pretty observant.....but considering the difficulty of OP trying to shoot video and audio while driving, and the resulting quality, that I cannot hear very well on iPad, my point was the link to a site that appears to provide definite numbers to help OP and others with similar questions.

This thread is not the first with a similar question, as I have researched a number of them and not found definitive answer that met my needs. The link I provided answered my question and may answer the question for others......

 

I haven't payed attention to the speed on shifts at WOT, but feather footing it my 96 will shift at 10 to second, 20 to third, 30 to od and lock up at 43. This is with 3.55 gears.
Does this help?