Cam change in progress w/pics.
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Make sure you have the timing set right, before turning the key. http://www.bionicdodge.com/Download/...uel%20Sync.pdf
Thread Starter
|
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Me tooo!!
~30-35. Complete estimate and probably on the high side still.
without a doubt bro.
Yes sir. I have that. Its step number 1,256 part S.
Gonna get the M1 setup today. Should have everything buttoned up today....
~30-35. Complete estimate and probably on the high side still.
without a doubt bro.
Make sure you have the timing set right, before turning the key. http://www.bionicdodge.com/Download/...uel%20Sync.pdf
Gonna get the M1 setup today. Should have everything buttoned up today....
Thread Starter
|
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
1. Timing Cover
2. Water Pump
3. H/B
4. New Rocker Bolts on
5. Installed stuff to the M1 intake, nipples, sensors, tstat, injector rail
6. Cleaned the **** throttle body. The IAC was like
Expecting all buttoned up tomorrow. Possibly a fire up attempt, not sure.
Thread Starter
|
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Taking Bets on Starts
Got the beast about 95% done.
1. M1 in place
2. VCs in place
3. Alt and Compressor in
4. Radiator in
5. Serp belt on
Wrapping up some wires, adding coolant, fan/shroud...etc.
So, how many start attempts before it fires?
Closest one UNDER.
1. M1 in place
2. VCs in place
3. Alt and Compressor in
4. Radiator in
5. Serp belt on
Wrapping up some wires, adding coolant, fan/shroud...etc.
So, how many start attempts before it fires?
Closest one UNDER.
