2wd lift question
#1
#2
#3
#4
#6
#7
Trending Topics
#8
Im not gonna guarantee it but 35s should fit that combo. I fit 33s with 1.5" of lift before with no rubbing. With nearly 5.5" of lift you should clear those tires. Do you have more offset wheels? Cuz 1.) The more offset they are, they might rub then. 2.) Stock wheels are claimed to not fit on lift spindles. You would need more offset wheels or wheel spacers. Your probably gonna want some new shocks with that combo too. Should look nice. I have a pic of a 5" lift 2WD if you haven't seen a picture of one. Just letting you know. good luck
#10
Eh, ill shoe and tell, but don't follow my lead. I did what people would call a no-no lift. But it should have put me near 3". My setup consists of two spring spacers. A spacer that's designed for the bottom of the spring, and a Daystar for the top. I have a flipped shackle and AAL for the rear. Now, when I redo my balljoints, I will be getting lift springs and shocks instead of spacers. Right now I run shock extensions on stock shocks. Looks good in my opinion, not too big, but way more clearance. I run 285/75R16s right now. BFG ATs. Ill post a pic later after work. And ill show you that pic of a 5" lift.