So, i have 3 in coil spacers for my ram. I do not have all the tools like a ball joint press to install them myself. So, a few days ago i go around town getting quotes (Biggest waste of my time in my life). This one place Trucks Unique wants $800 PER SIDE!!! Seriously? Is there any other options for installing these? thanks

 

Yea, buy the tools needed to do the job. Then you will have them.

 

+1 it's not very hard to do. You don't need a ball joint press to put the spacers in. If you wanted to replace them anyway just rent the tool. It's usually free from advance or autozone.

 

800 bucks a side????? Holy Smokes. That is truly outrageous.

 

Yea that's ridiculous. Just do it yourself with a few hand tools. You don't need a pro to install one. Just look at what your taking apart and put it back the same way.

 

Pretty simple to put spacers in rent a spring compressor and it's really easy. A couple hours max

 

I'll do it for 700 a side lol. I didn't even use a spring compressor. Just drop the a arm enough to get it out and use a floor Jack.

 

That's what I did.

 

Holy Sh*t!!! In this state, it'd get the guy thrown in jail for gouging (yep gouging a customer is against the law in Florida).

Before I went to 3" lift coils on my Grand Cherokee I had 2" spacers and it took me about 2 hours to do all four corners. Spring compressors are cheap, I got my set for like $49 at a local tool fair, but most auto parts stores will lend them for free. You can also use a big C clamp to do it...

 

bring it down and 200bucks i will do both lol

un bolt upper ball joint knock out the spindle

unbolt shocks

and swap bar

thats about all o remenber doing mine, ya and maybe the cap because of the brake line

i put a 1.5 in mine

3in is alot of stock shocks