Have a 98 dodge ram 1500 4x4 318 going 2 do the timing chain this week with plenum fix and kegger mod + waterpump has any one put a cam in there 318 that gos in with out any mods to the pmc? looking for low and mid range and top an all around cam that would be better than stock just thinking while ill have it a part

 

In the diy section i cam across a good cam write up made me change my mind on doing a cam just gonna do the 1.7 hs rockers best bang for the buck for me.

 

Try to grab a double roller timing chain for it

 

Need more answers than that

 

THIS IS THE CAM HUGHES SAID I SHOULD RUN GOOD STREETABLE CAM (THEIR WORDS) HER0814AL or ALN

 

whaT MOTOR DO YOU HAVE?

 

Here is a good camshaft. It is called an "RV cam." You will gain gobs of torque and add horsepower.
http://stores.hi-potek.com/-strse-25...4x4/Detail.bok


Here is a writeup about a cam that has almost the exact specs and some dyno numbers:
http://www.bionicdodge.com/bionic/in...p?topic=9197.0

 

318 But i was planning for heads If you email hughes tell them what you have and are doing to it they will help you choose a cam