2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Tighting band?

Thread Tools
 
Search this Thread
 
Old May 2, 2012 | 07:16 PM
  #1  
sapper7d's Avatar
sapper7d
Thread Starter
|
Registered User
Joined: May 2012
Posts: 2
Likes: 0
From: Fort Irwin CA
Default Tighting band?

I have a dodge ram 1500 sport and Im not getting hardly any power to the back wheels. I do have a 4" Sky Jacker lift on it and 37" tires on it, I know that will take some but not what im getting now. A bud of mine told me about two Tension bolts one on the side of the transmission and one inside the pan if I tighten these two bolts down will it help with any power? Cause motor is running fine it is pushing the power out so its got to be between the transmission and the rear end. Help me out here please
 
Reply
Old May 2, 2012 | 07:30 PM
  #2  
sam_priem's Avatar
sam_priem
Veteran
Joined: Jun 2010
Posts: 287
Likes: 0
From: Minnesota
Default

what gear ratio? did you re-gear it when you put a lift and bigger tires on?

you can always do a band adjustment but DO NOT just go underneith the truck and start tightening things. Since this is your first post, im guessing you dont have the Factory Servive manual downloaded. if not you can go under the DIY/FAQ section of the 2nd gen forum and download it there. That will tell what to adjust and how to adjust it.
 

Last edited by sam_priem; May 2, 2012 at 07:44 PM.
Reply
Old May 2, 2012 | 07:39 PM
  #3  
DK-v1's Avatar
DK-v1
Professional
Joined: Apr 2012
Posts: 142
Likes: 0
From: Baton Rouge, LA
Default

There are specific procedures when tightening bands.

I would be careful and get the proper information.
 
Reply
Old May 2, 2012 | 07:40 PM
  #4  
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

Dude, try plenum and 4.88 gears.
 
Reply
Old May 2, 2012 | 08:31 PM
  #5  
nate_9ers's Avatar
nate_9ers
Rookie
Joined: Apr 2012
Posts: 95
Likes: 0
Default

Little bit of research will most likely lead to changing the gears.
 
Reply
Old May 3, 2012 | 01:34 AM
  #6  
sapper7d's Avatar
sapper7d
Thread Starter
|
Registered User
Joined: May 2012
Posts: 2
Likes: 0
From: Fort Irwin CA
Default

Thanks guys and I did have 4.88 gears on it but I went to Pismo beach dunes and my old lady burnt it out playing in the sand. Even when I did have it it didn't have hardly any power to it any other ideals what it might be im open to ideals
 
Reply
Old May 4, 2012 | 01:54 AM
  #7  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Tightening the bands in the trans will NOT give you more power. Either the bands hold the drum or they do not. Band adjustment only effects when the clamp and if they clamp tight enough. If they do not clamp tight enough, it is not a loss of power getting to the wheels, it will be transmission slipping.

+1 on downloading the service manual - and read through it...

And +1 more on the gears. Fatory diff was not designed for the load of 37" tires.
 
Reply
Old May 4, 2012 | 12:23 PM
  #8  
billcart's Avatar
billcart
Professional
Joined: Aug 2010
Posts: 204
Likes: 0
From: Corpus Christi, TX
Default

Originally Posted by sapper7d
Thanks guys and I did have 4.88 gears on it but I went to Pismo beach dunes and my old lady burnt it out playing in the sand. Even when I did have it it didn't have hardly any power to it any other ideals what it might be im open to ideals
I WILL tell you this much... putting 4.56 gears or for your tire size 4.88's WILLLLLLLLLLLLLLLLLL give you your power back as long as your engine and trans are in good shape. If someone installed those gears like you said they lied, I can tell you from personal experience. I am a sand 4x4er and there is no way you can do it with those 3.55 gears that come factory and 33+ size tires. Adjusting the bands does not give you "power". They are not power bands.
 
Reply




All times are GMT -4. The time now is 08:12 AM.