DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

replaced roller hydraulic lifters, now no spark?

Thread Tools
 
Search this Thread
 
Old Jun 1, 2012 | 07:22 PM
Share
  #1  
xekon's Avatar
xekon
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 6
Likes: 0
Default nulls
nulls
 
Last edited by xekon; May 16, 2018 at 10:23 PM.
Reply
0
Old Jun 1, 2012 | 07:42 PM
Share
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Default
Check and see if you didn't pinch some wires at the back of the intake. Cam and crank sensors are both back there... and either will give a no-start condition.

Find out what you are missing if the wiring looks ok. Got spark? Fuel pump prime? Injector pulse?
 
Reply
0
Old Jun 1, 2012 | 07:46 PM
Share
  #3  
xekon's Avatar
xekon
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 6
Likes: 0
Default
nulls
 
Last edited by xekon; May 16, 2018 at 10:26 PM.
Reply
0
Old Jun 2, 2012 | 11:05 AM
Share
  #4  
xekon's Avatar
xekon
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 6
Likes: 0
Default
nulls
 
Last edited by xekon; May 16, 2018 at 10:25 PM.
Reply
0
Old Jun 2, 2012 | 03:04 PM
Share
  #5  
lastrights's Avatar
lastrights
Grand Champion
Joined: Sep 2007
Posts: 5,849
Likes: 5
From: the burgh
Default
How hard was it replace the lifters ? You have to remove rockers springs and pushrods ?
 
Reply
0
Old Jun 2, 2012 | 06:20 PM
Share
  #6  
xekon's Avatar
xekon
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 6
Likes: 0
Default
nulls
 
Last edited by xekon; May 16, 2018 at 10:25 PM.
Reply
0
Old Jun 3, 2012 | 12:39 AM
Share
  #7  
johnnyjaws98's Avatar
johnnyjaws98
Veteran
Joined: Feb 2012
Posts: 387
Likes: 0
From: Newburgh NY
Default
your crazey ! you dont need to touch yur fan to do your lifters
 
Reply
0

Trending Topics

Old Jun 3, 2012 | 12:41 AM
Share
  #8  
xekon's Avatar
xekon
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 6
Likes: 0
Default
nulls
 
Last edited by xekon; May 16, 2018 at 10:25 PM.
Reply
0
Old Jun 3, 2012 | 12:44 AM
Share
  #9  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default
Originally Posted by johnnyjaws98
your crazey ! you dont need to touch yur fan to do your lifters

I believe he removed the fan and shroud to allow removeal of other items to pull the intake.
 
Reply
0
Old Jun 3, 2012 | 08:53 AM
Share
  #10  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default
^ removing the fan and shroud allows you to stand in the engine bay to work.
it makes it a lot easier.


not me, but just a picture i hijacked.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
%$#!@ radiator drain cock




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 12:34 PM.