2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

plenum pan gasket

Thread Tools
 
Search this Thread
 
Old Aug 25, 2012 | 12:47 PM
  #1  
pipeliner798's Avatar
pipeliner798
Thread Starter
|
Registered User
Joined: Aug 2012
Posts: 21
Likes: 0
Default plenum pan gasket

what is the gasket that goes under the intake and plenum pan
 
Reply
Old Aug 25, 2012 | 01:12 PM
  #2  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Fel-Pro Plenum Gasket, just the plenum gasket (also sometimes referred to as the "lower intake manifold gasket"), around $12 or less: MS95462
Fel-Pro Intake Manifold Gasket Set, upper gasket and lower gasket, around $25 or less: MS95392-1
Dorman Intake Manifold Gasket Set, upper gasket and lower gasket, around $50 or less: 615-310

Fel-Pro usually works great. I found these part numbers at O'Reilly Auto Parts, Advance Auto Parts, and Autozone. I double-checked at Rock Auto, they have the same parts for slightly cheaper (way cheaper for the Dorman set), but I didn't check shipping. If you search the forum, you can find a 5% discount code for Rock Auto that will help a little.

Make sure and replace the bolts that go through the plenum gasket, as they are widely referred to as the reason that caused the blown gaskets in the first place.
 

Last edited by jasonw; Aug 25, 2012 at 01:14 PM.
Reply
Old Aug 25, 2012 | 04:16 PM
  #3  
It's Me Patt's Avatar
It's Me Patt
Captain
Joined: Jun 2012
Posts: 683
Likes: 1
From: East Coast
Default

Rock Auto code (in your cart enter it where it asks "where did you hear about us" box)
107634687366547

Lots of info here: https://dodgeforum.com/forum/2nd-gen...um-thread.html
 

Last edited by It's Me Patt; Aug 25, 2012 at 04:22 PM.
Reply
Old Aug 25, 2012 | 04:21 PM
  #4  
It's Me Patt's Avatar
It's Me Patt
Captain
Joined: Jun 2012
Posts: 683
Likes: 1
From: East Coast
Default

Originally Posted by pipeliner798
what is the gasket that goes under the intake and plenum pan
Are you planning on replacing it?
 
Reply




All times are GMT -4. The time now is 06:02 AM.