2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Defrost problem

Thread Tools
 
Search this Thread
 
  #1  
Old 09-28-2012, 08:29 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default Defrost problem

Hi, today I was driving around in the woods for a while and as the sun went down it got chilly so my buddy turned on the heat and all the sudden all the windows and windshield fogged up real bad. We cracked the windows open, turn the heat up and down, wiped the windshield a couple times and wait for a while but nothing worked, it was fogged right up tick.

Any idea what can cause that? I have good heat, not burning heat but good and I noticed a slight coolant smell a couple times before. A/C is not working anymore. Looks like the blower is blowing out humid air to do something like that.

Thanks
 
  #2  
Old 09-28-2012, 08:41 PM
ReadRam's Avatar
ReadRam
ReadRam is offline
All Star
Join Date: Jul 2010
Location: fargo, n.d
Posts: 794
Likes: 0
Received 0 Likes on 0 Posts
Default

Your heater core took a dump on you, bummer man. That antifreeze on your windsheild. Dash has to come off to access the core. May as well look at the evap core while your in there, at least inspect.
 
  #3  
Old 09-28-2012, 08:46 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Damn, I was hoping for some stupid to fix but in the back of my head I knew it would come down to this. So the core is leaking internaly and blowing coolant in the windshield?
 
  #4  
Old 09-29-2012, 02:37 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

So how do you know if the evap core is no good other than if it's rusted or some like that?
 
  #5  
Old 09-29-2012, 03:08 PM
gdstock's Avatar
gdstock
gdstock is offline
Legend
Join Date: Jul 2011
Location: Austin, TX
Posts: 8,259
Likes: 0
Received 3 Likes on 3 Posts
Default

I would replace it anyway., They are installed together. If you go through the work to do one, the other will take a dive two weeks down the road....(my luck, the next day...)
 
  #6  
Old 09-29-2012, 03:10 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes I plan on replacing it anyways because a/c is not working and it's probably part of the problem.
 
  #7  
Old 10-01-2012, 12:54 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

A/c evap will have to wait, too expensive. Any ill effect to not recharge the ac? And how about removing the whole system off the truck?
 
  #8  
Old 10-02-2012, 05:26 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Job is done and it falls in the category of, jobs I don't want to do twice.

Bottom of the HVAC was full of coolant. A/C evap core looked fine to me and the system still had pressure in it so maybe it was just too low to refrigerate enough. We will see next summer when I will recharge it.

Anything I should do to the A/C system because it's empty now?
 
  #9  
Old 10-02-2012, 05:51 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default

Did you disconnect the AC evap core too and remove the whole HVAC box out of the truck to replace the heater core?
 
  #10  
Old 10-02-2012, 09:21 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes I did, is there another way to do it?
 


Quick Reply: Defrost problem



All times are GMT -4. The time now is 08:28 AM.