What the heck is this leaking coolant??
#11
On the passenger side of the motor is a black hose then runs into the heater core, then there is a another hose that runs out of the heater core, unplug the one that goes in and plug it into the one that goes out. The hose that goes into the core should be 2 hoses clamped together, unclamp them, then run it to the out hose for the core.
Easy peasy.
Easy peasy.
#12
#13
Might be easier to undo the passenger side hose from the core at the firewall, run it across the engine in front of the air cleaner and see if it's long enough to connect where the other hose is first. If it reaches it would be best to tie it back so it doesn't rub on the serpentine belt. Don't know if it's long enough or not, went out and took a look at mine and couldn't really tell.
#14
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes
on
2 Posts
Edit:
Arde: not sure how it would rub the serpentine belt? Doing it the above way runs it on the back side of the motor, far away from the belts...
#16
#17
Yeah I know, I was saying run the hose that connects to the thermostat housing across the top of the engine to the other side. Whatever is easiest.
#18
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes
on
2 Posts
If it wasn't pitch black dark I'd take a picture. But it'll make more sense once you see it. The two hoses clamped together only have one end you can stick in a hose and clamp down on.