Hedman Headers, any good?
Registered User
Joined: Oct 2011
Posts: 6
Likes: 0
From what I read, they are.
When I asked the guy about the headers he said either hedman or hooker. Either or, I'll go check them out and probably turn them down. For an extra 200 I'll get what everyone else swear by. Cant go wrong that way.
Thanks for all the input so far, much appreciated.
When I asked the guy about the headers he said either hedman or hooker. Either or, I'll go check them out and probably turn them down. For an extra 200 I'll get what everyone else swear by. Cant go wrong that way.
Thanks for all the input so far, much appreciated.
also no gaskets or bolts
Thread Starter
|
Professional
Joined: May 2012
Posts: 202
Likes: 0
From: Ottawa, Ontario
When i called him he said any 318, 340 and 360. Im not 100% on this, but doesn't the 340 have a completely different style of head than our magnums? I talked to a buddy about them, we concluded that there was probably a reason why they were never installed.
Legend
Joined: Jun 2009
Posts: 8,025
Likes: 72
From: orangeville ontario
they may be different but the holes are in the same spots. people like getting magnum manifolds and 92/93 y-pipes for there older LA 318/360. might even be able to use the newer magnum y-pipes on the older rams but the 92/93 rams run 3" pipe from the y-pipe to the muffler.
Legend
Joined: Jun 2009
Posts: 8,025
Likes: 72
From: orangeville ontario
not all of them. just most of them. i think i saw one set for a 1st gen with a 3/8" thick flange instead of there normal 1/4" thick flange or other brands 5/16" thick flange.
http://www.summitracing.com/parts/he...dge/model/w150
http://www.summitracing.com/parts/he...dge/model/w150