When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
ill check all of those out. it doesnt look hard to install. ill prolly order it in the next few days, getting stuck in the yard hasnt been fun lately in the snow
That posi-lock is great. I'd just encourage checking out the vacuum system beforehand. The problem could literally be < $10 in vac lines/parts. If not, then you'll get familiar with the CAD shift fork/collar, which will lend itself to the posi-lock install.
IMHO, those CAD systems are worthless. The diaphragm keeps freezing. On mine the vac lines were good, but the connector on the unit kept snapping off. I changed the whole unit and a few years later the collar snapped again. The posi-lock is a much better system, and takes about an hour to install. For 150$, it's a very good long term solution.
it says to put it in 4 wheel drive you pull the shifter back into 4 wheel. press the button and then pull the cable? is that right? lol. mine is going to be here either tomorrow or monday