gen1 v10 viper heads onto Ram V10
Thread Starter
|
Registered User
Joined: Jan 2013
Posts: 3
Likes: 0
gen1 v10 viper heads onto Ram V10
Hey guys, ive got an 8L Ram v10 here im looking at putting viper gen1 alloy heads on. ive heard its possible with the water galleries in the heads redrilled as the iron and alloy v10 block is cast the same. does anyone know FOR SURE before i go out and buy viper heads. cheers
Administrator
Joined: Apr 2010
Posts: 87,483
Likes: 4,223
From: Clayton MI
Gen 1 heads will bolt on Must fill facotry water holes in the deck of the heads and drill new ones that match the Magnum's head gaskets.
Once the Viper heads are mounted (Gen 1-3) then any Gen 1-3 intakes will bolt on directly with a spacer made to fill the gap created by the additional 0.25" of deck height (thicker gaskets). Gen 4's need Gen 4 intake manifolds.
From a thread here.
Once the Viper heads are mounted (Gen 1-3) then any Gen 1-3 intakes will bolt on directly with a spacer made to fill the gap created by the additional 0.25" of deck height (thicker gaskets). Gen 4's need Gen 4 intake manifolds.
From a thread here.
